CPM Never Stops Evolving: New Colors Coming for CPM Equipment. Learn more here.
7900 Series

The 7900 Pellet Mill is the workhorse and go-to pellet mill for many applications. Whether it is hard-running biomass, high-capacity animal feeds or anything in between, the 7900 is known for its dependability and versatility.

Download Brochure >>

  • Bear claw die clamps - segmented for quicker die changes
  • IC lube system
  • Oil level sensor
  • Trapped key interlock
  • Pellet chamber and shear pin proximity switches
  • Positive direct gear drive provides a 98% energy transfer
  • Rounded cast gear case with internal ribbing for quieter operation
  • Metal-to-metal seals between components
  • Modular gearbox design for production flexibility
  • Replaceable quill flange
  • Stainless steel pellet chamber
  • Single motor for greater efficiency
  • Multi-positioning feeder for ease of installment and alignment
  • Low-speed, heavy-duty gearing
  • Enforcer die feeder
  • Lineator (Remote roll adjust)
  • Roll speed measurement (RSM) available on select models
  • Pre-wiring terminal box
  • Ethernet I/O panel
  • Automatic grease system

Specifications and Dimensions

U.S. Metric
 Model Die IDDie widthDie Working AreaHP*Die RPM 60Hz/50Hz Die Peripheral Speed FPM**
7930-430 in3.7 in349 in²400180/1501,696
7930-630 in6.1 in578 in²400180/1501,696
7930-830 in8.2 in777 in²400180/1501,696
7932-532.5 in4.9 in500 in²400180/1501,824
7932-932.5 in9.4 in964 in²450180/1501,824
7932-1132.5 in10.8 in1,106 in²500180/1501,824
7932-1232.5 in12.2 in1,251 in²500180/1501,824
7936-1236 in12.2 in1,385 in²500180/1501,989
7936-1436 in14.2 in1,605 in²500-600180/1501,989

*HP/KW may change with application; 1,800 RPM motor at 60 Hz and 1,500 RPM motor at 50 Hz.
**Feet per minute - calculated with 3-inch thick die and 1,800 RPM motor.
***Meters per second - calculated with 3-inch thick die and 1,500 RPM motor.

Request a Test

See for yourself what our equipment can do. Send us a sample and we'll provide a detailed analysis of the recommended equipment specifications and horsepower requirements.

Visit Test Center »